How to insert a sim card (sim card) into an iPhone. For those who just bought an iPhone. How to insert or remove a SIM card from Apple devices: step-by-step instructions and tips for owners Where to insert a SIM card into an iPhone 6

Any operation of a mobile phone begins with the installation SIM cards. In many models of cellular devices, when installing a card with a number, you must remove the back cover and remove the battery. Insert SIM card into iPhone thus it won't work. Apple iPhone developers approached the card replacement a little differently.

At the top of the phone, they took a special slot into which the SIM card tray is inserted, without the need to partially disassemble the phone. In order to remove the tray, use a special tool, if there is no tool, you can use a paper clip. Do not use a needle as it may damage the locking device of the phone. Insert the SIM card into the tray, and the tray into the iPhone as shown in the picture:

The method of installing a SIM card discussed above is provided for the first three iPhone models ( iPhone, iPhone3G and iPhone 3Gs), installing a SIM card in iPhone 4 and iPhone 4S is slightly different:
Firstly, the connector with the tray has been moved from the top to the right side.

Secondly, due to the fact that the fourth generation iPhone only works with micro SIM, inserting a standard SIM card into the iPhone 4, 4S will not work, although it still works out, for this you need to manually or purchase a trim kit that turns your SIM into a micro-SIM:

After placing the card with the tray into the iPhone slot, the signal strength and the name of the mobile operator used should appear in the upper left corner of the screen, if everything is normal, then the iPhone is ready to work. If the signal does not appear, then you can try to delve into the "Settings" ("Operator" - put the marker on "Automatic").

If the phone, after installing the card, does not ring, the signal level and the operator do not appear, then it is possible that you are under the operator. This is where the dancing with a tambourine begins! Well, if everything is fine and the sim card works fine, then you can.

Attention: before removing the SIM card, turn off the power of the device.
After successfully installing the SIM card, we recommend reading.

In this article, we will talk about which SIM card is in iPhone 7. In general, a card for iOS gadgets and its correct choice worries many novice users. Or those who are upgrading to a newer iPhone.

Everyone knows that every “fresh” model of a device from Apple is improved. This principle "apple" company observes both in terms of design and "stuffing". But if the first usually undergoes minor changes, then the second - cardinal.

Of course, such a seemingly insignificant detail as a map also changes with the development of a new iPhone line.

Will not go deep into history on this. Just note that the time of standard sims will soon sink into oblivion. They are being replaced by Micro and Nano formats. And which card is suitable for the iPhone 7 - the latest model of the "apple" device - read on.

Let's make a reservation right away that the element required for the seventh gadget is also suitable for iPhone fifth and sixth lines. Moreover, for all their variations - from simple ones to devices with marking S, C and Plus.

Thus, if you are going to become a happy owner of an iPhone version 5 and older, prepare a Nano SIM card. We emphasize that for the first time such an element was used in gadgets of the fifth line and is still used.

This card is only slightly smaller than the Micro. And in order to make the Nano-format out of the latter, the user will have to cut off the entire plastic surface and leave only the chip.

How many sims are in an iPhone?

Absolutely all Apple devices are equipped with a single card slot. This is useful to know so as not to accidentally buy a Chinese fake. So if a fraudulent seller convinces you that a model with 2 SIM cards is a new development of an "apple" company, do not believe these ridiculous arguments. This company does not have such versions of gadgets and, probably, is not expected in the near future. Although many users probably dream of such a device. But while the developers do not even hint about it.

Replacing a card today is a common and easy operation. Moreover, almost every telecom operator is engaged in the release of universal elements, from which the user can "squeeze out" the desired format.

But no one forbids cutting off the old SIM card either. To do this, it is better to use a special cutter. How to do this will be detailed below. If you are confident in your abilities, follow our instructions - and go ahead. Also on the net you can find many diagrams and videos on this topic.

How to put a SIM card in iPhone 7?

To do this, follow these steps:

• Get a card of the required format from one of the operators. If you already have it, but not Nano, the installation will fail. You can also exchange an old element for a new one. But in this case, you will have to pay extra. Or immediately buy a new one, if you do not hold on to the old phone number.
• So let's say you have the "correct" card. Now pull out the appropriate tray in the machine using a paperclip. It can also replace it with a regular clerical one. Insert a paper clip with pressing movements. The tray will come out, help him with your hands. Place the card in the tray and slide it back all the way.

The device will automatically determine which type of operator, unless, of course, the gadget is flashed for a specific one. Everything, you can enjoy the network.

A way to cut any SIM card under Nano

This simple procedure can be done at home yourself or contact a specialist. If you decide to do everything yourself, prepare in advance the following list of things:

• Stationery knife or scissors.
• Pen.
• Ruler or caliper.
• Sandpaper (can be replaced with a nail file).

If everything is at hand, you can start. Proceed strictly according to this algorithm:

• Draw the dimensions of the future SIM card with a pen. Do this on the surface of the old element. The exact dimensions of the Nano element are 12.3×8.8 mm. The markup must be accurate down to the smallest detail. And you can do it even easier. If you have a printer at home, just find a template online and print it out. Then transfer the paper blank to the card.
• Using a utility knife, cut off the unwanted plastic. Do everything with the utmost care, trying not to damage the electronic chip.
• Use a nail file and trim the edges. Turn the plastic layer on the top side of the card. The thickness should be 0.67 mm. Be careful that the chip is not processed - so it will inevitably be damaged.

Before the operation of cutting a SIM card to Nano format, remember that doing everything yourself, it is easy to damage the chip and disable the card. Then it will not be possible to restore the element, and you will have to buy a new one. To minimize the risks, you can practice on some old card that you no longer need. And only after you make sure that you can do everything right - work with a valid SIM card.

Other ways to cut a SIM card for iPhone 7

Customizing the SIM card yourself, with your own hands, is not at all necessary. You can replace the element with the one you need from the operator or use a special cutter and do everything much faster.

The named tool is something like a hole punch or a stapler. An ordinary SIM card is placed in it and with one movement a simple card turns into an element of the required format.

You can buy it in the communication salon. You also need to apply there to replace the old card with a new one. You just need to contact the salon with the appropriate replacement statement and immediately receive a kit suitable for your device.

If your gadget has a slot for a card of standard dimensions, Nano cannot be inserted there. You will have to use a special adapter. The latter is placed in the SIM card slot in the device itself. And the card is already inserted into the adapter. This device is worth every penny. And it brings a lot of benefits. For example, in the future, you won’t have to change your SIM card if you want to use it in a smartphone that supports a different format.

Here is finally the treasured white box with the long-awaited iPhone 6 in your hands. The only thing left is to set up and use it for your own pleasure. It is clear that first of all you need to insert a SIM card.

What card is in the "sixes"?

You ask "What should be the SIM card in the iPhone 6?". In the "sixes", as well as in their predecessor - the iPhone 5 series, instead of a regular card, they use nano - sim, developed with the support of Apple and launched in 2012. They differ, first of all, in size - nano is much more compact and thinner than the standard one. It has parameters of 12.3 × 8.8 × 0.67 mm. In all other respects, the principles of their operation are identical, there are simply no plastic rims around the metal carrier with a chip, and the security parameters have been slightly improved.

It is best, of course, to insert the original nano-sim into the iPhone, it looks like this.

pruning

The cost of replacing a standard SIM card with a nano, in the same MTS - for example, costs a lot - 24,300 rubles.

Therefore, many prefer to cut it to the desired format on their own. It will take just a few minutes, and does not require special skills or devices - the whole procedure is performed with ordinary kitchen scissors.

This is what “modifications” look like, which you can do on your own - just cut off the edges. For the "sixes" the extreme right is suitable.

Many service companies offer to quickly and efficiently “fit the nano-size” to the sixth iPhone for little money.

If you decide to cut it yourself, do not forget to first mark the characteristic beveled corner - you can put a dot with a marker on the back of the plastic side. We also recommend making a similar pattern - for the above nano-sim parameters. So cutting it will be much easier and less likely to make a mistake.

And here is the original solution from K. Ropp, which helps to quickly cope with the task.

It is enough to select the desired size and make markings along the intersection lines. The fit is nearly perfect. And the probability of damaging important elements of the chip is minimized.

It is better to cut with a small allowance, and then brush off everything superfluous with sandpaper. Even if you go a little on the metal sheet - it's okay. Usually the chip is placed in the center and will not be damaged.

After cutting and grinding the ends, remove a little thickness from the reverse plastic panel, since the factory sim card, and, therefore, the slot for it in the iPhone, is 0.09 mm thinner - then they need to be removed. If this is not done, then you will not be able to open the port and get the stuck card. We recommend inserting it into the tray from time to time and adjusting it so that it does not protrude above its metal rim, and it can then be pulled out. After that, carefully wipe it from dust and that's it - nano-sim can be used.

How to put it?

So, the card is ready - it remains only to install it. Schematically, you can pull out the nano-jack like this.

In order to open the receiving tray, you will need a special needle included in the kit.

With its help, you can safely pull out the tray from the iPhone, into which you need to insert a SIM card. However, many do not find it in the package, but it is there, just not immediately visible.

And all you need to do is get the instructions, and pull it out of the paper mount in the center.

So, in order to open the nano-card tray, you need to insert the pin into the hole located on the side, on the right side of the iPhone display, and press firmly.

After a slight click, the outer plug will slightly move away from the body, and it can be easily removed.

If the original iPhone needle is lost, the same can be done with a regular paperclip (needles with sharp edges cannot be used).

Recommendations

Regarding the SIM card, there are several important points.

2. If you plan to cut the existing one yourself, follow the manipulations described by us. It should “sit” tightly in the tray, otherwise, at a minimum, you will have communication problems, and in the worst case, the port will be damaged.

3. Very carefully bypass the places with metal contacts, do not forget to "comb off" the excess thickness only on the side where the plastic is. Walking on the metal, you will probably ruin the SIM card.

4. Be aware that older cards may not work after being cut.

No mobile phone will work without a SIM card. Rather, it will work, but it will not fulfill its main function. Given the variety of slots and formats for SIM cards, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated in this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, the old Nokia phones were incredibly difficult in this regard. I had to bother a lot and look for a slot where to insert a SIM card. In the iPhone, everything is provided for the convenience of the user: there is no need to remove the back cover, and even a special tool for removing the tray is included in the kit. However, the tray itself was not invented by Apple. All the same company Nokia first implemented a removable tray. But this is past history, and we will go directly to the question itself.

Types of SIM cards

First of all, we pay attention to the fact that different iPhones use SIM cards of different sizes. The third generation of phones from Apple worked with SIM cards of regular sizes. Then came the fourth generation of phones that could only insert Micro Sim cards. Further, the fifth, sixth and seventh generation only work with Nano Sim cards.

All these cards differ only in size: width, length, thickness. Therefore, when buying a starter pack, it is important to check with the seller so that he sells the card of the size you need. Some starter packs come with cards of all sizes at the same time: that is, there are special bending lines along which you can break out a card for your phone.

Will a regular SIM card fit in the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut an ordinary large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone perfectly received the signal of the desired operator. Even today, an ordinary standard size SIM card can be cut to the size of Nano or Micro SIM and it will work.

But there is no such need now. Operators sell SIM cards of all sizes. And if you still have an old large SIM card, and you bought a phone where it does not fit, then in any mobile phone store you will be replaced with the desired size. In this case, you do not need to know how to insert a SIM card into an iPhone. This can be done even in the store, and you just have to watch.

SIM card installation

So, how to insert a SIM card into an iPhone? In the box, the phone always comes with a paperclip (it is also called (iScrepka), with which the tray opens. This paperclip can be seen with something else: a pin, a needle, nail scissors, even a toothpick. But this can simply damage the tray. It is located with right side (on the side of the phone).

We take our paper clip, insert it into the hole of the tray (a very small hole), press down a little, after which the tray will come out a few millimeters. Then just take it out with your hands completely.

When the tray is in your hands, place the SIM card in it. It is important that it be placed chip-side down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert a card in a different way, some users manage to do this.

Now insert the tray with the SIM card back into the slot and press down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: You don't have to turn off your phone. Previously, you had to remove the battery, and only then insert a SIM card, but now there is no such need.

After the SIM card is inside, the phone will ask you to unlock it. It's normal that it's disabled by default. To do this, you will need to enter a PIN code. You must know this code for sure (it is indicated on the starter pack), but if this is your old card, then you already know it for sure.

We enter the PIN code, the lock is removed and the phone finds the desired network. If the network cannot be found, then in the settings there is an item "Operator". There you can choose the operator to which the card belongs. The default is "Automatic", and in this position everything should work fine. But there are exceptions. Therefore, just select your operator and the phone will immediately find the network. But if problems arise and you still don’t know how to insert a SIM card into the iPhone 5S, then proceed to the next step.

If the SIM card is not detected

If after the manipulations and even the choice of the operator, the phone writes: "No network", then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it's annoying, but it's not a big deal. They learned to remove the lock long ago, so special slots for iPhones are sold on the radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip gasket for the SIM card, and a paper clip.

This article describes in as much detail as possible how to insert a SIM card into an iPhone 6, but this instruction is valid for all models.

In the iPhone, Apple's world-famous device, all elements harmoniously coexist with each other. And the functionality of these devices strikes the imagination of the most sophisticated user. Any Apple phone model, be it iPhone 3, iPhone 4S, SE, 5C, iPhone 5S, 6S, 7 and many others, each of them is endowed with a wide variety of convenient features that are being improved from version to version.

Despite the convenience of using "apple" devices, some users, having first picked up a device called iPhone 3, iPhone 6, model 5S, 7 or any other, are lost and cannot figure out how to insert a SIM card into the device.

In fact, the SIM card is inserted very simply. You just need to know the algorithm of actions and strictly follow it.

The manual below explains in detail how to insert a SIM card into an iPhone 5S. Where to insert a SIM card and other issues are covered in this manual.

Any device from Apple, not only a 5S smartphone, but also other phone models - iPhone 3, 4, 6, 7, etc. before starting active work, you need to prepare. And only after that you can take care of the question of how to insert a SIM card into the iPhone.

So the first thing you need to do is:

• Make sure your iPhone - whether it's 3, 4, 5, 7, or whatever - isn't locked due to a carrier change. A large number of Apple gadgets are locked to a specific communications company - a communications service provider. And if your goal is to switch to another company, you will need to unlock the sim slot.
• If your device (3.4.5, etc.) is not locked, everything is in order, and no preparatory procedures are required. You can insert a SIM card into an iPhone without any problems.

how to insert sim into iphone 5

Now let's deal with the main question - how to insert a card into an iPhone 5. By the way, the information that will be given below will also be useful to those who do not know how to insert a SIM card into an iPhone 4.

In addition, the instruction will give an answer to the question of how to remove a SIM card from an iPhone. To do this, you just need to reverse the order of actions and perform all the steps in reverse order.

And now let's take a step-by-step look at how the mobile operator card is inserted into the iPhone 5 correctly. This simple process involves the following user actions:

• Before opening the slot, the device must be turned off. To do this, you need to press and hold down for some time (several seconds) the power off key of the smartphone. When an inscription appears on the display calling for turning off the device, you need to swipe the button and the device will immediately turn off.
• After turning off the device, you need to place the thinnest end of a special spatula in the slot and remove the card tray with a pressure movement. It will have a recess for a SIM card where you need to insert it.
• Insert the card so that the gold-colored contacts are directly at the bottom.
• Push the tray back in.
• Check the side of the phone to make sure the tray is all the way in.

Reference. In recent years, SIM cards have been issued in slightly different formats than before. Now they are much smaller. This causes some difficulties, since older versions of iPhones are not designed for SIM cards of the new format - and vice versa.

We also note that all Apple phones have a SIM slot, into which you can insert and, if necessary, get a card of one or another operator. The inserted element gets without problems. In some models, you can pull out a SIM card using a special tool that comes with the device. For most versions of gadgets, the SIM card slot is located on the side of the case and on its right side. Only in old models - version 3 - the card slot is located at the top, on the border of the front and rear parts of the case. However, pulling out the card in all devices, as well as inserting it into the slot, is not difficult.

After all the above steps, if you do everything right, when you turn on the iPhone for the first time, the device will connect to the network automatically. Now you can enjoy exploring the functions of the new gadget and try them in action, as well as make calls and send messages to friends and acquaintances.

If you need to change the SIM card, you should remove it in the reverse order, i.e. perform all the actions indicated in the instructions, starting from the 5th.